Digital Digest -> Software -> eac3to -> History & Old Downloads

eac3to -> Version History

This is the version history page for eac3to. You can return to the main page for this software by clicking here.

Index:


Version 3.31
  • Release Date: Nov 15, 2015
  • Download(s):
    • fixed: TrueHD decoding -> AC3 encoding didn't work properly
Version 3.30
  • Release Date: Nov 2, 2015
  • Download(s):
  • * libDcaDec is now default for all DTS tracks except XSA / low bitrate
    * fixed: #310: Use ffmpeg like external encoder
    * fixed: #312: Convert to wav with a big negative delay works incorrectly
    * fixed: #314: 'edit' option adds one frame less than expected
    * fixed: #345: Fails to decode Atmos track with no embedded AC3 track
Version 3.29
  • Release Date: Mar 26, 2015
  • Download(s):
    • added libDcaDec decoder for DTS decoding, new default for 7.x tracks
    • fixed: #086: left/right eye information was inverted in some 3D Blu-Rays
    • fixed: #263: decoding TrueHD Atmos with active dialnorm information failed
    • fixed: #264: using "-float32 -normalize" didn't work in all cases
Version 3.28
  • Release Date: Mar 11, 2015
  • Download(s):
    • fixed: #001: different number of frames for left and right eye
    • fixed: #061: valid silence edit was sometimes rejected
    • fixed: #067: error messages were not available to GUIs
    • fixed: #086: left/right eye information was inverted in some 3D Blu-Rays
    • fixed: #131: TrueHD Atmos streams could not be demuxed or decoded
    • fixed: #243: ArcSoft DTS decoder crash made eac3to crash, too
    • downStereo: added 0.7071 factor for surround/back channels (ITU-R BS.775-3)
    • downStereo/Dpl: using 0.5 instead of 0.7071 factor for LFE (ITU-R BS.775-3)
Version 3.27
  • Release Date: Jan 7, 2013
  • Download(s):
  • fixed: raw processing cut away 16 samples sometimes
Version 3.26
  • Release Date: Jan 6, 2013
  • Download(s):
  • fixed: downmixing of less than 6 channels to stereo failed
  • patched libav AC3 decoder to properly decode high frequencies
  • added support for floating point volume changes (e.g. -0.5db)
  • dialnorm is no longer removed from DTS-HD tracks (didn't work, anyway)
Version 3.25
  • Release Date: Jan 3, 2013
  • Download(s):
  • fixed: option "-down6" didn't handle 6.1 tracks properly
  • fixed: option "-down6" for 7.1 content lowered side channels in volume
  • fixed: 6.1 DTS/E-AC3 libav decoding resulted in incorrect 70f channel mask
  • fixed: a couple of funny AC3 channel configs resulted in swapped channels
  • fixed: option "-check" failed for SRT subtitles
  • fixed: MKV tracks without language information didn't default to "English"
  • fixed: 16bit MLP decoding didn't work at all
  • fixed: DTS 2.1 decoding had empty sub channel when using ArcSoft decoder
  • fixed: muxing h264 video streams without VUI eventually crashed
  • fixed: SMPTE 302M 20bit PCM tracks didn't extract properly
  • improved AC3 seamless branching handling by detection of identical frames
  • improved DTS seamless branching handling by detection of identical frames
  • updated to latest ffmpeg/libav revision
  • added support for libav DTS 6.1 and 7.1 decoding (only in core, no DTS-HD)
  • added support for encoding all AC3 channel configurations
  • added support for demuxing Blu-Ray primary E-AC3 tracks (AC3 core)
  • libav is now the default decoder for AC3 and E-AC3
  • option "-down2" is now deprecated, but still supported
  • option "-downDpl" mixes down to Dolby Pro Logic II
  • option "-downStereo" mixes down to standard stereo
  • added support for mixing any channel configuration to stereo/DPL
  • DPL downmixing doesn't lower volume, anymore (except when clipping occurs)
  • editing audio tracks by adding silence is now less restrictive
  • trying to mux right eye stream to MKV errors out now, instead of crashing
  • doing "eac3to 1) movie.mkv" for 3D BDs now properly skips right eye stream
  • FLAC encoding is now done with optimized block sizes for "LossyWAV" files
  • encoder bitdepth for lossy DTS tracks is no longer displayed
  • option "-test" no longer checks mkvtoolnix
Version 3.24
  • Release Date: Aug 16, 2010
  • Download(s):
  • 3.24:
    • fixed: m2ts framerate detection for h264 tracks was half of what it should be
  • 3.23:
    • fixed: handling of MKV files with header compression didn't work
    • fixed: track listing of some Blu-Rays failed silently
    • added support for decoding mono tracks with ArcSoft DTS decoder
    • added reading support for DTS tracks with additional DTS-HD header
    • improved m2ts framerate detection
    • video bitdepth is displayed now, if different than 8 bits
    • chroma format is displayed now, if different than 4:2:0
Version 3.22
  • Release Date: Jun 27, 2010
  • Download(s):
  • fixed: reducing bitdepth from >16bit to 16bit resulted in static (v3.21)
  • updated to latest ffmpeg/libav version
  • libav MP1/MP2/MP3 decoders now decode to floating point
  • libav E-AC3 decoder now supports spectral extension
Version 3.21
  • Release Date: Jun 19, 2010
  • Download(s):
  • fixed: big w64/rf64 files sometimes had incorrect header information
  • fixed: HD DVD chapter times were wrong by 3.6 seconds per hour
  • fixed: 6.1 DTS decoding with ArcSoft resulted in wrong channel order
  • fixed: 6.1 TrueHD decoding with libav resulted in wrong channel order
  • fixed: reducing bitdepth of clipped audio produced too much bitdepth
  • when clipping is automatically fixed, the applied dB gain is logged
  • when normalizing an audio track, the applied dB gain is logged
Version 3.20
  • Release Date: Jun 3, 2010
  • Download(s):
  • fixed 3D demuxing (argh)
Version 3.19
  • Release Date: Jun 1, 2010
  • Download(s):
  • added support for 3D Blu-Rays (playlists, detection & demuxing)
Version 3.18
  • Release Date: Mar 10, 2010
  • Download(s):
  • TrueHD dialnorm removal now uses "-31db" instead of "-0db"
  • TrueHD frames with -0db dialnorm are now automatically patched to -31db
  • added MKV demuxing support for TrueHD tracks
  • added MKV demuxing support for Blu-Ray PGS subtitle tracks
  • added MKV demuxing support for (MS ACM) extensible WAV tracks
Version 3.17
  • Release Date: Oct 12, 2009
  • Download(s):
  • updated libFLAC to version 1.2.1
  • added a flush after every log line to help GUIs
  • "eac3to some.mpls" now also works if the stream files aren't there, anymore
  • fixed: number of subtitles was not appended to demuxed subtitles' file name
  • fixed: dialnorm removal (for Nero decoder) failed with some 2.0 TrueHD files
Version 3.16
  • Release Date: May 4, 2009
  • Download(s):
  • added undocumented "-no2ndpass" switch to turn off 2nd pass processing
  • fixed: two pass processing sometimes produced superfluous sup files
  • fixed: MPG/EVO/VOB audio tracks with "PES extension 2" were not detected
  • fixed: very small W64/RF64 files were not detected correctly
  • fixed: when processing was aborted, log file was sometimes not created
  • fixed: sometimes specifying a title number addressed the wrong HD DVD title
Version 3.15
  • Release Date: Mar 30, 2009
  • Download(s):
  • "24.975" is now interpreted as "25.000/1.001"
  • Blu-Ray "sup" are demuxed with DTS set to 0 again, proper fix will come later
  • fixed: error code not set for "source file format could not be detected"
  • fixed: audio resampling from/to 24.975 didn't work properly
  • fixed: WAV files beginning with lots of zeroes were sometimes not accepted
Version 3.14
  • Release Date: Mar 10, 2009
  • Download(s):
  • WAV reading was broken for all but very small files (introduced in v3.13)
Version 3.13
  • Release Date: Mar 9, 2009
  • Download(s):
  • fields and frames are counted and displayed separately now
  • added DIRAC bitstream parser
  • added support for "-24.975" and "-changeto24.975"
  • Blu-Ray subtitle demuxing: PTS value is now written to both PTS + DTS
  • joining MKV files is now declined with a proper error message
  • last chapter is now removed, if it's less than 10 seconds from end of movie
  • fixed: "-normalize" didn't work with stdout, anymore
  • fixed: audio delay was incorrect when 1st m2ts part contained no audio data
  • fixed: very small WAV files were not detected correctly
  • fixed: "eac3to source.eac3 dest.dts -core" crashed
Version 3.12
  • Release Date: Feb 25, 2009
  • Download(s):
  • fixed: track languages for HD DVD discs were not shown
  • fixed: MLP channel order was wrong for some specific channel configurations
  • fixed: "DirectShow reported 255 channels" happened sometimes
Version 3.11
  • Release Date: Feb 16, 2009
  • Download(s):
  • v3.11:
    • fixed: MKV subtitle track language wasn't shown
  • v3.10:
    • Blu-Ray title listing now includes chapter information
    • fixed: v3.09 didn't show track languages for Blu-Rays
  • v3.09:
    • added support for MKV "SRT/UTF8", "SRT/ASCII", "ASS" and "SSA" subtitles
    • increased some internal buffers to avoid AC3 overflow in the "thd ac3 joiner"
    • fixed: frame counting didn't work for MKV video tracks
    • fixed: video tracks FPS change was sometimes declined
    • fixed: video tracks with "strange" FPS were sometimes handled incorrectly
    • fixed: clipping removal 2nd pass was executed even for "stdout"
    • fixed: "eac3to -test" displayed an outdated Nero download link
    • fixed: specifying a specific playlist still used default playlist's chapters
Version 3.08
  • Release Date: Feb 12, 2009
  • Download(s):
  • fixed: reading physical disc speed was abysmal (introduced in v3.07)
  • fixed: read error from physical drive resulted in crash
Version 3.07
  • Release Date: Feb 9, 2009
  • added support for MKV video tracks without sequence headers in bitstream
  • added support for old style MKV AAC tracks
  • added support for various MKV "A_MS/ACM" audio formats
  • added support for various MKV "V_MS/VFW/FOURCC" video formats
  • added warning for tracks where bitstream parsing failed
  • demuxing a video track now also complains about video gaps/overlaps
  • the "-check" option now also complains about video gaps/overlaps
  • optimized memory allocation
  • fixed: adding subtitle caption count to filenames sometimes didn't work
  • fixed: subtitle caption counts in log sometimes had wrong track numbers
  • fixed: all non-supported MKV tracks shared the same description
  • fixed: incorrect framerate mismatch complaint was shown for pulldown sources
  • fixed: FLAC tracks in MKV files don't slow down detection, anymore
  • fixed: source file detection read 300MB from every source file
Version 3.06
  • Release Date: Feb 3, 2009
  • added MKV reading/parsing support
  • added demux support for MKV (E-)AC3, DTS(-HD), AAC, MPx, FLAC and WAV tracks
  • added demux support for MKV "modern style" MPEG2, VC-1 and h264/AVC tracks
  • reading from (HD) DVD and Blu-Ray drives uses different reading APIs now
  • empty tracks in TS/m2ts container are not listed, anymore
  • for 24.000 fps video tracks a little warning is displayed now
  • when demuxing subtitle files, the number of captions is added to the filename
  • timestamp derived FPS is used for gap checking instead of video bitstream FPS
  • fixed: 44.1khz AC3 encoding was still broken
  • fixed: zero byte stripping pass was done for true 24bit TrueHD tracks
  • fixed: downconverting WAV files with 0x3f channel mask didn't work
  • fixed: log output "remaining delay [...]" was sometimes wrong for AC3 tracks
  • fixed: silent frame creation was tried for E-AC3 although it can't work
Version 3.05
  • Release Date: Jan 26, 2009
  • warning is shown if h264 video bitstream contains "full range" flag
  • h264 video bitstream "full range" flag is automatically removed
  • you can disable removal of the "full range" flag by doing "-keepFullRange"
  • added reader for external DVD, HD DVD and Blu-Ray SUP files
  • external SUP files can be delayed now
  • number of HD DVD and DVD subtitles in SUP track is counted and displayed
  • number of forced and non-forced Blu-Ray subtitles in SUP track is displayed
  • "-check" option now also works for demuxed audio, video and subtitle tracks
  • when reading from physical disk drive, 2KB (instead of 1MB) blocks are read
  • improved automatic skipping over damaged first 5MB of TS/m2ts files
  • fixed: resampling and Surcode encoding didn't work in one step
  • fixed: TRP detection crashed
  • fixed: track listing sometimes contained tracks without description
  • fixed: h264 with missing framerate in 1st sequence header made eac3to crash
  • fixed: some AC3WAV files were not detected correctly
  • fixed: video frame count was not displayed when 2nd pass was executed
Version 3.04
  • Release Date: Jan 19, 2009
  • video track framerates are now shown with up to 3 decimals, if necessary
  • m2ts/TS framerate is determined by interpreting video track timestamps
  • m2ts/TS framerate is displayed in the format description (if available)
  • warning is shown if container timestamps don't match video framerate
  • warning is shown if video bitstream has a non-standard framerate
  • video without framerate information: container framerate is used
  • video without framerate information: framerate can be set (e.g. "-23.976")
  • video without framerate information: new framerate is written to bitstream
  • remaining non-fixed audio delay is now shown in log
  • command prompt colors are restored after eac3to has run through
  • fixed: 2-pass processing for stripping zero bytes sometimes crashed
  • fixed: CA (Conditional Access) tracks were shown as "Unknown audio track"
Version 3.03
  • Release Date: Jan 14, 2009
  • fixed: MPEG2 1088 to 1080 cropping was still incomplete
Version 3.01
  • Release Date: Jan 12, 2009
  • fixed: m2ts LCPM demuxing didn't work with v3.00
  • fixed: TrueHD -> TrueHD+AC3 conversion didn't work with v3.00
  • 3.00:
    • broken AC3, DTS, AAC and MPx streams are now automatically repaired
    • errors in TS/m2ts files are now reported (with runtime) and ignored
    • damaged first max 5MB and max 5% of a TS/m2ts file are automatically skipped
    • video/audio tracks which can't be parsed, are now demuxed in raw form
    • added support for "line 21" closed captions in ATSC/NTSC broadcasts and DVDs
    • added reading of movie / network name from "line 21" XDS information
    • for gaps, edits & repairs > 1000ms eac3to now inserts silence by default
    • for gaps, edits & repairs < 1000ms eac3to now loops audio by default
    • option "-silence" forces eac3to to insert silence instead of looping audio
    • option "-loop" forces eac3to to loop audio instead of inserting silence
    • newly encoded AC3 frame is now used for "silence" instead of file's 1st frame
    • increased reading block size (might improve reading performance)
    • optimized TS/m2ts demuxing performance
    • optimized MPEG2, VC-1 and h264 parsing performance
    • command line output is colored now (e.g. errors drawn in red)
    • MPEG2 1920x1088 bitstream is now automatically patched/cropped to 1920x1080
    • log file now contains "" and "" indicators
    • workaround for movie playlists which want the same m2ts file played twice
    • added version check for eac3to (doh!)
    • when a read error occurs, reading is tried again up to 3 times
    • (E-)AC3 frames with -0db dialnorm are now automatically patched to -31db
    • updated to newer libAften build -> fixes 44.1khz encoding
    • fixed: sometimes "The last DTS frame is incomplete" was a false alarm
    • fixed: mkvtoolnix version check didn't work, anymore
    • fixed: errors were meant to be output to stderr, but they weren't
    • fixed: automatic gap/overlap fixing with AAC targets aborted processing
    • fixed: positive edit began a bit too early
    • fixed: two ID3 tags after each other made eac3to fail detecting the format
    • fixed: some VOB files were not detected properly
Version 2.87
  • Release Date: Dec 31, 2008
  • 2.87: fixed: negative edit was done too late (introduced in v2.86)
  • 2.86: fixed: "1:some.ac3" instead of "1: some.ac3" failed for 2 digit track numbers
  • 2.86: fixed: "eac3to source movie.mkv" demuxed video instead of muxing to MKV
  • 2.86: negative edit now begins at the specified runtime instead of ending there
Version 2.85
  • Release Date: Dec 29, 2008
  • using "eac3to source video.h264" doesn't demux audio/subtitle tracks, anymore
  • using "eac3to source movie.*" demuxes video, audio and subtitle tracks
  • using "eac3to source 1: video.* 2: audio.*" demuxes the specified tracks
  • AC3 and E-AC3 dialnorm removal now uses "-31db" instead of "-0db"
  • workaround for DTS files where last byte is missing in each audio frame
  • fixed: v2.84 sometimes crashed when parsing HD DVD XML files
  • fixed: v2.84 sometimes chose incorrect XML file
  • fixed: v2.84 sometimes chose wrong m2ts playlist file
  • fixed: some actions were eventually applied twice when "-2pass" was used
  • fixed: AAC encoding quality "quality=0.0x" was passed to Nero as "0.x"
Version 2.84
  • Release Date: Dec 22, 2008
  • fixed: 2nd pass gap removal was tried (and failed) for TrueHD+AC3 targets
  • fixed: processing aborted when trying to fix gaps in PCM destination files
  • fixed: more than one RAW/PCM overlaps resulted in lost sync (since v2.81)
  • fixed: demuxing TrueHD+AC3 stream by title number didn't renew the AC3 part
  • new option for removing or looping audio data, e.g. "-edit=0:20:47,-100ms"
  • title sorting criteria changed: resolution is more important than runtime
  • new option "-lowPriority" sets eac3to to background/idle priority
  • libav warnings are now assigned to the affected audio track
  • fixed: "lossless check failed" false alarms for seamless branching movies
  • fixed: spike removal filter was not active for the very last overlap/gap
  • improved muxing h264 streams which begin with double sequence headers
  • source files are now opened with "share read + write access"
  • destination files are now opened with "share read access"
Version 2.83
  • Release Date: Dec 19, 2008
  • fixed: gap/overlap correction didn't work for FLAC and WAV files
  • fixed: when clipping was detected, 2nd pass was not always executed correctly
Version 2.82
  • Release Date: Dec 16, 2008
  • fixed: sometimes eac3to stalled before processing (introduced in v2.81)
Version 2.81
  • Release Date: Dec 15, 2008
  • audio gap/overlap fixing is now automatically done in a 2nd pass
  • option "-normalize" maximizes the volume of the audio data, needs 2 passes
  • audio clipping is detected and automatically removed in a 2nd pass
  • "-2pass" activates 2 pass mode (can speedup seamless branching processing)
  • superfluous zero bytes are now automatically removed in 2nd pass
  • "-phaseShift" shifts surround channel phase by 90° for DPL II downmixing
  • spike removal post processing filter now always produces 16bit samples
  • empty channels are now reported by the bitdepth analyzer as "no audio data"
  • option "-shutdown" shuts the PC down automatically after processing is done
  • the HD DVD XPL with the longest title is now loaded instead of VPLST000.XPL
  • eac3to can now open selected XPL files (e.g. "eac3to ADV_OBJ\VPLS002.XPL")
  • eac3to can now open selected mpls files (e.g. "eac3to PLAYLIST\00002.mpls")
  • fixed: TrueHD streams starting with a non-major header failed to decode
  • fixed: WAV files created by eac3to with empty channels had incorrect header
  • fixed: RAW/PCM gap/overlap remover sometimes didn't work correctly
Version 2.80
  • Release Date: Dec 8, 2008
  • fixed: FLAC files with missing runtime information were not accepted
  • gone back to old VOB/EVO auto delay calculation method, more reliable for me
  • improved TS broadcast audio delay detection
  • added support for constant bitrate AAC encoding
  • added support for AAC encoding 0.00 and 1.00 quality
Version 2.79
  • Release Date: Dec 1, 2008
  • improved m2ts file joining overlap detection (mainly for interlaced video)
  • vob/evo audio delay detection now uses "vobu start presentation time"
  • program streams which are neither VOB nor EVO are now reported as "MPG"
  • resampling is now automatically activated for AC3/DTS encoding, if necessary
  • "Mersenne Twister" random number generator is used for dithering now
  • zero padded DTS tracks are now displayed as such
  • fixed: 32bit PCM conversion to floating point was broken
  • fixed: with some (rare) movies first subtitle began after 50 minutes runtime
  • only plugins with the extension *.dll are loaded now
Version 2.78
  • Release Date: Nov 24, 2008
  • fixed: h264 interlaced muxing to MKV could result in too long runtime
  • fixed: transcoding DTS-HD/E-AC3 core sometimes failed to work correctly
  • improved TS/m2ts audio delay detection
  • added filter to remove spikes when fixing gaps/overlaps in RAW/PCM audio
  • each eac3to instance has its own log file now
  • playlist output now also works with "-log" option
  • default bitrate for mono & stereo AC3 encodes lowered to 448kbps
  • default bitrate for mono & stereo DTS encodes lowered to 768kbps
  • it should be possible to handle TsSplitter splitted TS files via "+" now
Version 2.77
  • Release Date: Nov 18, 2008
  • pcm/raw audio delay is now applied before resampling and fps change
  • parsing of command line with multiple sources files sometimes failed
Version 2.75
  • Release Date: Nov 10, 2008
  • added (E-)AC3 5.1 "EX" detection
  • added (E-)AC3 2.0 "Surround" detection
  • added (E-)AC3 2.0 "Headphone" detection
  • NeroAacEnc is now fed with up to 32bit float (if available)
  • resampling option "-quality=low|high|ultra" not supported, anymore
  • new option "-fast" switches SSRC resampler to fast, but low quality mode
  • new option "-r8brain" forces use of r8brain resampler instead of SSRC
  • added support for AES3 PCM streams in TS container
  • started working on encoder plugin interface
Version 2.74
  • Release Date: Nov 4, 2008
  • "-demux" failed to work for DTS-HD and TrueHD\AC3 tracks in v2.73
  • fixed: DTS-HD tracks could let processing abort at the very end of the movie
Version 2.73
  • Release Date: Nov 3, 2008
  • changed TS demuxing logic to make the broken (!) new SkyHD broadcasts work
  • DTS core and "TrueHD/AC3" AC3 parameters are displayed separately now
  • when using "-core" option, eac3to now bases its decisions on core parameters
  • added WAV/W64/RF64 read/write support for 32bit PCM and 32/64 bit float
  • option "-full" allows WAV/W64/RF64 output to be native (default Surcode encoding didn't work, anymore
  • fixed: MPEG2 + h264 video gap/overlap removal didn't work properly
Version 2.72
  • Release Date: Oct 28, 2008
  • fixed: per channel bitdepth analyzation didn't work correctly
Version 2.71
  • Release Date: Oct 27, 2008
  • fixed: v2.70 detected Blu-Rays as "TS" without chapters and track languages
  • fixed: TrueHD downmixing to 2.0 didn't work
Version 2.70
  • Release Date: Oct 27, 2008
  • added floating point support to the complete audio processing chain
  • added gain functionality, e.g. "-3db" or "+1db"
  • bitdepth analyzation is now done separately for each channel
  • fixed: when decoding lossy audio with libav, peaks were clipped incorrectly
  • fixed: libav MP1/2/3 decoder output was cut down to 24bit
  • fixed: with some EVO sources the AC3 track was not listed
  • fixed: if no key frame was found, h264 track in m2(ts) was not listed
  • fixed: video/audio data before first PAT/PMT was discarded
  • Blu-Ray chapters now don't contain link points, anymore, unless necessary
  • added 10db boost to LFE channel, when "-down2" and "-mixlfe" are used
  • ArcSoft output can now be overwritten to "-2", "-6", "-7" or "-8" channels
Version 2.69
  • Release Date: Oct 20, 2008
  • added high precision SSRC resampler
  • resampling "-quality" now allows "low", "high" (SSRC) or "ultra" (r8brain)
  • resampling quality now defaults to "high" (SSRC)
  • bitdepth is now analyzed separately for original vs. processed data
  • fixed: downmixing 16 bit DTS tracks to 5.1 or 2.0 didn't work
  • fixed: Sonic Decoder was incorrectly assumed to decode XXCh DTS files to 6.1
  • for movies the Haali Muxer can't handle "-seekToIFrames" is suggested now
Version 2.68
  • Release Date: Oct 14, 2008
  • fixed crash when transcoding Blu-Ray/HD DVD track to FLAC
Version 2.67
  • Release Date: Oct 13, 2008
  • information about HDCD and real bitdepth is now stored into FLAC metadata
  • information about real bitdepth is now read from FLAC metadata
  • PTS break: PTS is increased by 1 frame (fixes some false overlap warnings)
  • fixed: video gap log text was sometimes not correct (runtime information)
  • added undocumented switch "-neroaacenc="c:\whatever\neroaacenc.exe""
  • error log messages are now output to stderr instead of stdout
  • improved "which mkvtoolnix is currently installed?" check
  • fixed: mkvtoolnix version check "Oct" date was not interpreted correctly
Version 2.66
  • Release Date: Oct 6, 2008
  • changed eac3to to allow AAC encoding with 7.1 channels (for new Nero encoder)
  • fixed AGM creation for files bigger than 4GB
  • added support for Nero's new AAC Encoder download URL
  • lowered volume of error/success sounds
  • when there are 2 similar playlists the one with less chapters is ignored now
Version 2.65
  • Release Date: Sep 29, 2008
  • automatic channel remapping for 6.1 tracks with wrong channel mask
  • automatic channel remapping for ArcSoft DTS decoder 6.1 tracks
  • fixed: TrueHD -> Surcode encoding didn't work, anymore
  • fixed: MPEG2 + h264 video gap/overlap removal didn't work properly
Version 2.64
  • Release Date: Sep 22, 2008
  • added channel mask reading support to Blu-Ray PCM track parser
  • added channel mask reading support to TrueHD parser
  • added channel mask reading & writing support to FLAC decoder / encoder
  • changed 5.x channel mask from $03x to $60x
  • changed 6.x channel mask from $13x to $70x
  • mono wavs output now creates correct names for some channel masks
  • when transcoding 6.1 sources to PCM, 7 channel doubling is activated now
  • fixed: DTS channelmask detection was incorrect for very strange configs
  • fixed: sometimes the h264 video stream of a Blu-Ray m2ts was not detected
Version 2.63
  • Release Date: Sep 15, 2008
  • fixed: incorrect detection of 6.0 DTS tracks as 5.0
  • fixed: incorrect libav DTS channel remapping for 6.x or 7.x tracks
  • fixed: incorrect ArcSoft DTS channel remapping for "6.0" and "2/2.1" tracks
  • fixed: v2.61+62 incorrectly decoded 16bit TrueHD tracks to 24bit FLAC/WAV/RAW
  • fixed: some DTSWAV files made HDCD decoder crash
  • fixed: DTSWAV and AC3WAV samplerate and bitdepth were reported incorrectly
  • improved DirectShow channel configuration reporting
  • undocumented option -progressnumbers now outputs "analyze:" and "process:"
Version 2.62
  • Release Date: Sep 9, 2008
  • fixed: downmixing 16 bit 7.1 DTS tracks to 5.1 stopped working in v2.61
Version 2.61
  • Release Date: Sep 8, 2008
  • added read/write support for Sony wave64 (*.w64) format
  • added read/write support for RF64 wave64 (*.rf64) format
  • added write support for AGM format
  • true bitdepth (e.g. 18 bits) is written to extensible wav header now
  • when reading 16/24 (true/storage) WAV files, zero bytes are stripped now
  • added HDCD detection for WAV and FLAC files
  • added HDCD detection for PCM tracks in VOB/EVO/m2ts containers
  • added HDCD decoder written by Christopher Key
  • added new option "-decodeHdcd" to decode HDCD information
  • HDCD track -> lossy format: HDCD decoding is automatically activated
  • when DTS-MA and TrueHD tracks are decoded, a check for HDCD is done
  • fixed some incorrect DTS channel masks
  • added automatic libav DTS channel remapping
  • added automatic ArcSoft DTS channel remapping
  • added channel map manipulation to make funny DTS tracks decode with Sonic
  • added channel map manipulation to make funny DTS tracks decode with ArcSoft
  • added channel volume modification to undo ArcSoft mono surround splitting
  • for TrueHD+AC3 creation AC3 delay and gap correction are disabled now
  • fixed: DTSWAV and DTSAC3 readers reported too long runtime
  • fixed: sometimes processing aborted with a "bitdepth reducer" complaint
Version 2.60
  • Release Date: Sep 1, 2008
  • fixed: in v2.59 "-analyzeBitdepth" stopped working for Blu-Ray TrueHD tracks
  • 2.59:
    • extension ".thd+ac3" is supported now to define destination format
    • TrueHD tracks without AC3 core can be converted to TrueHD/AC3 now
    • demuxing a single-part Blu-Ray title keeps the original "TrueHD/AC3" data
    • demuxing a multi-part Blu-Ray title automatically redoes the AC3 substream
    • added workaround for Blu-Ray playlists with multiple last "invalid" parts
    • fixed: "-check" didn't work for LPCM tracks
Version 2.58
  • Release Date: Aug 30, 2008
  • h264 parser rewritten: framerate, pulldown etc is detected reliably now
  • h264 pulldown is automatically removed from progressive movie sources now
  • h264 pulldown removal can be disabled by using "-keepPulldown"
  • h264 muxing now fully supports streams with mixed 23.976 and 29.970 content
  • h264 1920x1088 bitstream is now automatically patched/cropped to 1920x1080
  • h264 filler data is now already removed during demuxing
  • h264 sources with funny framerates (e.g. Luxe.tv HD) are patched to 25fps now
  • mixed video/movie h264 streams are now always muxed with 29.970 timestamps
  • speedup/slowdown now changes framerate information in the h264 bitstream
  • options "-24p", "-60i" and "-30p" are no longer supported
  • fixed Blu-Ray seamless branching subtitle remuxing
  • added workaround for Blu-Ray playlists with a last small "invalid" m2ts part
  • bitdepth analyzation is now done for decoded FLAC, WAV, PCM, DTS MA, too
  • bitrate is now also reported for FLAC, WAV and PCM tracks
  • when encoding AC3, DTS or AAC, the encoding bitrate is reported
  • fixed: v2.57 incorrectly decoded 16bit TrueHD tracks to 24bit FLAC/WAV/RAW
  • (M2)TS discontinuities before the first unit start are ignored now
  • new option "-progressnumbers" replaces progress bar with percentage numbers
Version 2.56
  • Release Date: Jul 30, 2008
  • fixed: processing aborted when a VC-1 sequence end code was found
Version 2.55
  • Release Date: Jul 29, 2008
  • AAC bitstream parser added
  • AAC auto detection added
  • AAC bitstream delay added
  • AAC bitstream gap/overlap correction added
  • AAC decoding (Nero & Sonic) added
  • old MP2 parser now "officially" and properly supports MP1, MP2 and MP3
  • MP3 decoding (libav & Nero) added
  • added support for MPEG Audio version 2 and version 2.5
  • added (limited) support for ID3, APE and LYRICS tags in MP3 and AAC tracks
  • improved VOB/EVO audio delay detection algorithm
  • detection and automatic skipping of invalid vob units
  • options "-60i" and "-24p" are no longer supported for MPEG2 video
  • improved detection of MPEG2 framerate / pulldown state / mode
  • improved MPEG2 muxing warnings
  • several bugs in MPEG2 video muxing fixed
  • fixed interlaced VC-1 muxing with user data (Nine Inch Nails)
Version 2.54
  • Release Date: Jul 21, 2008
  • VC-1 pulldown removal rewritten (same output as vc1conv 0.4, but faster)
  • VC-1 pulldown removal is activated by default
  • VC-1 pulldown removal can be manually deactivated by "-keepPulldown" option
  • VC-1 pulldown removal is also activated when muxing to MKV now
  • fixed Blu-Ray subtitle demuxing for seamless branching movies
  • better task seperation when doing multiple operations with an audio track
Version 2.53
  • Release Date: Jul 14, 2008
  • Blu-Ray PGS subtitle support added
  • added support for EVO/VOB subtitles which begin very late in the file
  • MPEG2 video muxing doesn't rely on GOP headers, anymore
  • all (M2)TS discontinuities are now reported with exact file position
  • fixed: reading language informtion from TS files didn't work correctly
Version 2.52
  • Release Date: Jul 7, 2008
  • fixed muxing of MPEG2 broadcasts where "temporal_reference" overruns
  • MPEG2 bitstream headers are now updated correctly when speedup is performed
  • MPEG2 bitstream headers are now updated correctly when slowdown is performed
  • MPEG2 bitstream headers are now updated correctly when pulldown is removed
  • pulldown removal is now automatically disabled for MPEG2 broadcasts
  • AC3WAV (SPDIF formatted) support added
Version 2.51
  • Release Date: Jul 1, 2008
  • DTS Express bitstream parser added
  • DTS Express auto detection added
  • DTS Express bitstream delay added
  • DTS Express bitstream gap/overlap correction added
  • DTS Express decoding (Nero & ArcSoft) added
  • fixed: 6.1 -> 7.1 channel doubling resulted in wrong channel order
  • added (undocum.) option "-no7doubling" to disable 6.1 -> 7.1 channel doubling
  • DTS tracks with funny speaker settings are displayed as "7.1 (strange setup)"
  • warning is displayed when decoding "7.1 (strange setup)" tracks with ArcSoft
Version 2.50
  • Release Date: Jun 29, 2008
  • ArcSoft DTS Decoder DLL is now directly accessed instead of using DirectShow
Version 2.49
  • Release Date: Jun 28, 2008
  • DTS parser sets correct channel mask now
  • DTS-HD parser now properly detects format, channels and samplerate
  • added support for ArcSoft DTS(-HD) Decoder
  • added several tweaks to make ArcSoft Decoder behave correctly
  • added ArcSoft test to the "-test" processing
  • made ArcSoft Decoder default for DTS and DTS-HD decoding
Version 2.48
  • Release Date: Jun 23, 2008
  • 96kHz LPCM tracks in (M2)TS and EVO/VOB containers didn't work correctly
  • "Applying (E-)AC3 delay" now only shows if the bitstream is actually modified
  • fixed crash in MP2 reader when checking some PCM tracks
  • added support for MLP formats 13 - 16
  • improved/corrected MLP channel descriptions
  • MLP parser sets correct channel mask
  • added proper channel remaps for libav MLP decoding of "funny" channel formats
  • added proper channel remaps for Nero MLP decoding of "funny" channel formats
  • added proper channel remaps for Nero AC3 decoding of "funny" channel formats
  • when doubling 7th channel the channel mask is set correctly now
  • channel mask is corrected if a decoder doesn't output all channels
  • channel mask is corrected if a channel downmixing is performed
Version 2.47
  • Release Date: Jun 16, 2008
  • improved detection of AC3/DTS tracks in TS/M2TS container
  • added support for Blu-Ray style LPCM tracks in TS container
  • fixed 44.1kHz AC3 tracks
  • fixed crazy audio delay values when no video track was detected
  • sometimes video/audio tracks were not properly detected in (M2)TS container
  • MPEG2 demuxing/remuxing incorrectly output the first sequence headers twice
  • sequence end codes are removed when demuxing video now, too
  • MPEG2 pulldown removal is automatically activated only for EVO HD sources now
  • MPEG2 pulldown removal can be manually activated by using "-stripPulldown"
  • MPEG2 pulldown removal can be disabled by using "-keepPulldown"
Version 2.46
  • Release Date: May 12, 2008
  • MPEG2 muxing now fully supports streams with mixed 23.976 and 29.970 content
  • mixed video/movie MPEG2 streams are now always muxed with 29.970 timestamps
  • if a movie MPEG2 stream goes 29video, processing is automatically restarted
  • MPEG2 pulldown is now automatically removed whenever an MPEG2 stream is read
  • new option "-keepPulldown" can be used to disable MPEG2 pulldown removal
  • corrected default WAV channel masks for 4.0, 6.1 and 7.1
  • added proper channel remaps for libav AC3 decoding of "funny" channel formats
  • added general channel mask support
  • WAV parser reads channel mask from extensible header
  • (E-)AC3 parser sets correct channel mask
Version 2.45
  • Release Date: May 5, 2008
  • Blu-Ray angles are now reported as separate titles
  • duplicate playlists are not listed in the "folder view", anymore
  • reduced TrueHD and RAW/PCM gap/overlap threshold to 7ms
  • reduced (E-)AC3 gap/overlap threshold to 60% of the runtime of one audio frame
  • reduced MP2 gap/overlap threshold to 60% of the runtime of one MP2 frame
  • reduced DTS threshold to 60% of the runtime of one DTS frame, but at least 7ms
  • fixed: Blu-Ray chapter export sometimes wrote incorrect "00:00:00.000" items
  • improved handling of MPEG2 streams (changes from interlaced to progressive)
  • video information now shows "with pulldown flags", if applicable
  • removed "-ignoreDiscon" from help; hint is shown when a discontinuity occurs
  • added "-ignoreEncrypt" option; hint is shown when a source is encrypted
  • new option "-extensible" creates WAV files with a slightly different header
  • fixed some smaller bugs
Version 2.44
  • Release Date: May 1, 2008
  • libav is now automatically used when Nero/Sonic decoders are not working
  • gap/overlap correction of RAW/PCM tracks sometimes aborted
  • rerunning de/remuxing to correct gaps/overlaps ignored RAW/PCM tracks
  • "lossless check failed" messages are surpressed on join points now
Version 2.43
  • Release Date: Apr 28, 2008
  • added automatic Blu-Ray playlist parsing
  • added support for multi part (e.g. seamless branching) Blu-Ray titles
  • audio gap/overlap detection rewrite completed
  • added audio gap/overlap correction functionality
  • added Blu-Ray chapter support
  • log lines are now prefixed with a track identifier
  • RAW/PCM delay is used instead of bitstream delay, if possible
  • fixed: video framecount was missing
Version 2.42
  • Release Date: Apr 24, 2008
  • added support for 16bit DTSWAV files
  • fixed: Blu-Ray TrueHD support was broken
Version 2.41
  • Release Date: Apr 21, 2008
  • added full MP2 (MPEG2 audio) support including decoding + bitstream delay
  • added TS/M2TS runtime detection
  • improved VOB/EVO runtime detection
  • added TrueHD gap/overlap detection
  • audio gap/overlap detection logic rewritten (not complete yet)
  • fixed: log file option didn't work correctly
  • fixed: some DTS tracks in PAL TS broadcasts weren't detected correctly
  • fixed: some E-AC3 tracks in PAL TS broadcasts weren't detected correctly
Version 2.40
  • Release Date: Apr 14, 2008
  • video framecount is now also shown for TS/M2TS demuxing/remuxing
  • "-check" option added to check container for corruption
  • TS/M2TS: discontinuity check sometimes fired false alarms
  • HD DVD subtitle language/description was not always correct
  • title listing is only shown if there are at least 2 titles
  • if there is only one title, the title is automatically selected
  • TS/M2TS audio delay detection was broken
  • improved audio delay detection for broadcasts and badly mastered discs
  • TS/M2TS video demuxing could eventually add some invalid data
  • new option "log=c:\whatever\log.txt" specifies the log file path/name
Version 2.39
  • Release Date: Apr 7, 2008
  • simple audio transcoding was broken
Version 2.38
  • Release Date: Apr 7, 2008
  • fixed file path handling bug
Version 2.37
  • Release Date: Apr 7, 2008
  • added HD DVD chapter support
  • added HD DVD subtitle demuxing support
  • added pre-freeze detection for Haali Matroska Muxer bug
  • invalid characters are removed from file names now
  • log file is copied to destination path (of first destination file)
Version 2.36
  • Release Date: Mar 31, 2008
  • TS/M2TS: discontinuity is only checked for tracks which are de- or remuxed
  • TS/M2TS: "-demux" creates both a "thd" and an "ac3" file for "thd/ac3" tracks
  • TS/M2TS: "eac3to source.m2ts movie.mkv" transcodes "thd/ac3" tracks to FLAC
  • M2TS: track language is displayed (if the file "xxxxx.clpi" is available)
  • TS: track language is displayed (if the source file contains this info)
  • video gaps/overlaps in the last 5 seconds of the movie are ignored now
Version 2.35
  • Release Date: Mar 25, 2008
  • fixed broken EVO support
Version 2.34
  • Release Date: Mar 25, 2008
  • TS/M2TS: fixed PAT/PMT reading bug
  • TS/M2TS: new "-ignoreDiscon" option makes eac3to ignore discontinuity errors
Version 2.33
  • Release Date: Mar 24, 2008
  • added full TS and M2TS support (file joining not supported yet, though)
  • further improved "-demux" file names
  • help text and HD DVD track listing is now also written to the log
Version 2.32
  • Release Date: Mar 23, 2008
  • added automatic "VPLST000.XPL" and "HVA00001.VTI" parsing
  • "eac3to" or "eac3to ." inside of a HD DVD folder lists all title sets
  • "eac3to someHdDvdMovieFolder" lists all title sets
  • "eac3to someHdDvdMovieFolder whatever.mkv" converts the longest title set
  • "eac3to someHdDvdMovieFolder x) whatever.mkv" converts the selected title set
  • EVO report now contains the EVO display name (if "VPLST000.XPL" is available)
  • added language to EVO audio track listing (if "VPLST000.XPL" is available)
  • added EVO audio track display names (if "VPLST000.XPL" is available)
  • sequence end codes are stripped from VC-1, MPEG2 and h264/AVC
  • put "-stripPulldown" option back in on request
  • option "-demux" now writes to "current directory" instead of source directory
  • option "-demux" now creates files with meaningful names
  • doing "eac3to src.evo dst.mkv" now creates audio files with meaningful names
  • doing "eac3to src.evo dst.mkv" writes the audio files to same path as the MKV
  • after successful (erroneous) processing "success.wav" (error.wav) is played
Version 2.31
  • Release Date: Mar 17, 2008
  • DTSWAV input support added
  • fixed bitstream delaying of 96khz DTS tracks
  • improved DTS runtime calculation
  • fixed DTS audio gap/overlap correction for strange DTS formats
  • fixed E-AC3 audio gap/overlap correction for strange bitrates
  • fixed incorrect MKV "default duration" when using "-24p" or "-30p"
  • fixed incorrect MKV "default duration" when using "-slowdown" or "-speedup"
  • improved support for "open bitrate" DTS files
  • slightly improved automatic (E-)AC3 delaying exactness
  • 2.30: fixed wrong MPEG2 framerate (bug introduced in v2.29)
Version 2.29
  • Release Date: Mar 10, 2008
  • added automatic audio gap/overlap correction for (E-)AC3, DTS and LPCM
  • options "-slowdown" and "-speedup" can now also be used for video muxing
  • added support for muxing of EVO's secondary video track to MKV
  • added "-24p", "-30p" and "-60i" options to overwrite detected h264 framerate
  • fixed some MPEG2 muxing problems
  • temporarily disabled "-stripPulldown" because vc1conv 0.3 is better
Version 2.28
  • Release Date: Mar 6, 2008
  • new "-seekToIFrames" switch makes Basic Instinct (h264) muxing work
Version 2.27
  • Release Date: Mar 5, 2008
  • fixed h264/AVC muxing crash with some movies (due to too high RAM usage)
  • fixed missing frames at the end of the movie when doing h264/AVC muxing
  • fixed non-working "eac3to -test"
Version 2.26
  • Release Date: Mar 3, 2008
  • Haali Splitter replaced with internal splitter for EVO h264/AVC tracks
  • external raw h264/AVC tracks can now be muxed directly to Matroska
  • timestamps for h264/AVC MKV videos don't need to be rewritten, anymore
  • gaps/overlaps in h264/AVC track of EVO files are detected now
  • h264 aspect ratio is detected and written into MKV now
  • Haali Media Splitter is not being used at all, anymore
  • mkvtoolnix is not being used at all, anymore
  • added detection for MPEG2 interlaced -> progressive mode change
  • workaround for eacGui bug
Version 2.25
  • Release Date: Feb 18, 2008
  • fixed MPEG2 muxing for interlaced content
Version 2.24
  • Release Date: Feb 17, 2008
  • Haali Splitter replaced with internal splitter for EVO MPEG2 tracks
  • external raw MPEG2 tracks can now be muxed directly to Matroska
  • timestamps for MPEG2 MKV videos don't need to be rewritten, anymore
  • gaps/overlaps in MPEG2 track of EVO files are detected now
  • VC-1 and MPEG2 aspect ratios are detected and written into MKV now
  • fixed bug with "-down2" option
Version 2.23
  • Release Date: Feb 16, 2008
  • fixed bug which made some DTS tracks appear dirty although they weren't
  • fixed extremely big gap detection with Fantastic Four 2
  • fixed non cleaned up gaps file bug
Version 2.22
  • Release Date: Feb 11, 2008
  • gap/overlap logic changed completely (optional two pass muxing now)
  • "-ignoreGaps" parameter is gone
Version 2.21
  • Release Date: Feb 10, 2008
  • latest libav MLP/TrueHD decoder fixes "lossless check failed" bug
  • latest libav MLP/TrueHD decoder fully decodes 7.1 TrueHD tracks now
  • Matroska muxing speed dramatically improved
  • eac3to now detects and handles E-AC3 7.1 tracks correctly
  • option "-core" extracts 5.1 core from E-AC3 7.1 tracks
  • added support for small DTS files (< 300kb)
Version 2.20
  • Release Date: Jan 28, 2008
  • changed VC-1 muxing method to fix problems with several movies, e.g.
    • Unforgiven
    • Phantom of the Opera
    • Million Dollar Baby
    • Fantastic Four 2
  • fps value is now also added to MKV header when muxing raw VC-1 stream
  • added new "-skip" option to skip corruption in the beginning of an EVO file
  • added extra handling which fixes some EVO authoring bugs
Version 2.18
  • Release Date: Jan 26, 2008
  • fixed bug which stopped eac3to v2.15-17 from working on some PCs
  • fixed h264 bitstream parsing bug (Sum of all Fears)
  • fps value is added to MKV header now
  • relaxed VC-1 gap detection once more
  • TrueHD decoding to stdout fixed (always output as 24 bit now)
Version 2.17
  • Release Date: Jan 23, 2008
  • fixed VC-1 pulldown removal
  • VC-1 pulldown removal must now be activated by the new option "-stripPulldown"
  • improved VC-1 gap/overlap detection
  • new option "-ignoreGaps" disables VC-1 gap/overlap detection
  • libav E-AC3 decoder background decoding removed again
Version 2.15
  • Release Date: Jan 21, 2008
  • Haali Splitter replaced with internal splitter for EVO VC-1 tracks
  • external raw VC-1 tracks can now be muxed directly to Matroska
  • timestamps for VC-1 MKV videos don't need to be rewritten, anymore
  • some problematic VC-1 movies should mux fine to MKV now (e.g. POTO USA)
  • gaps/overlaps in VC-1 track of EVO files are detected and displayed now
  • pulldown can be removed from external raw VC-1 tracks now
  • pulldown is automatically removed when demuxing EVO VC-1 tracks now
  • updated to the latest revision of the libav E-AC3 decoder
  • some minor changes and bugfixes
Version 2.14
  • Release Date: Jan 5, 2008
  • libav TrueHD decoder "end of stream" bug should be fixed now
  • fixed libav DTS decoder - subwoofer channel is properly decoded now, too
  • patched libav DTS decoder to output full 24 bit
  • updated to the latest revision of the libav E-AC3 decoder
  • when decoding E-AC3 with Nero, libav decoding is also executed at the sa
Version 2.13
  • Release Date: Dec 31, 2007
  • added option to downmix multi channel audio to stereo
  • added support for VC-1 custom aspect ratios
  • added stdout output support
Version 2.12
  • Release Date: Dec 25, 2007
  • video resolution, framerate and mode (progressive/interlaced) are displayed
  • rewriting timestamps should now always write the correct framerate
  • after a full EVO/VOB processing the number of video frames is shown
  • EVO 16 bit and 24 bit LPCM demuxing supported now (need samples for 20 bit)
  • (E-)AC3 bitstream can be delayed now (similar to delaycut)
  • DTS bitstream can be delayed now (similar to delaycut)
  • DTS-HD High-Res and Master Audio bitstream can be delayed now
  • when demuxing bitstream audio tracks from EVO delay is automatically applied
  • some little bugs fixed
Version 2.11
  • Release Date: Dec 22, 2007
  • libav E-AC3 decoding is without DRC now
  • libav AC3 decoding added (without DRC)
  • libav E-AC3 and AC3 decoding hacked to return full 24 bit
  • fixed: delay was not applied to lossless audio tracks
  • fixed crash when parsing PCM files without doing any conversion
  • TrueHD dialnorm was displayed incorrectly
  • changed 23.976 to 24/1.001
  • fixed some more minor bugs
Version 2.10
  • Release Date: Dec 19, 2007
  • fixed crash which occurred when doing "EVO/VOB -> Surcode DTS encoding"
  • "eac3to source.evo movie.mkv" syntax replaces "-auto" option
  • "eac3to 1.evo+2.evo movie.evo" syntax supported now for simple EVO/VOB joining
Version 2.09
  • Release Date: Dec 19, 2007
  • EVO demuxing added with proper delays for all audio tracks
  • EVO file joining/rebuilding added
  • automated EVO video remuxing (Matroska) added
  • automated rewriting of Matroska timestamps to 24p via mkvtoolnix added
  • multiple operations on the source file can now be run at the same time
  • switch "-test" tests all external DirectShow filters and tools
  • latest ffmpeg/libav TrueHD and E-AC3 decoder patches included
  • latest libAften build included
  • libav TrueHD decoder is now the default decoder for TrueHD/MLP
  • support for libav DTS decoding added
  • fixed a whole lot of bugs (and might have added a few new ones)
Version 2.08
  • Release Date: Dec 3, 2007
  • fixed: bitdepth reducer sometimes crashed when being fed a PCM file
  • fixed: FLAC encoder sometimes crashed when delay was applied
  • fixed: some TrueHD files were dithered/processed by Nero when they shouldn't
  • fixed: Surcode 1.0.29 encoding automation
  • fixed: source file was deleted when source and dest file names were identical
  • eac3to output is now always written to "log.txt"
  • when a crash occurs, "log.txt" is added to the bug report
  • improved help text + hints slightly
  • undocumented switch "-check16bit" added
  • undocumented switch "-mono" added
Version 2.05
  • Release Date: Nov 24, 2007
  • added support for libav/ffmpeg decoding of TrueHD/MLP and E-AC3
  • added "-libav" switch to force libav decoding
Version 2.04
  • Release Date: Nov 24, 2007
  • don't need dtsac3source.ax, anymore
  • don't need Nero Splitter, anymore
  • don't need Sonic HD Demuxer, anymore
  • replaced hacked DirectShow feeding with a cleaner approach
  • added support for DTS-HD Master Audio 7.1 tracks (only 5.1 decoding)
  • little performance boost for PAL speedup/down on DualCore CPUs
  • fixed some bugs
Version 2.03
  • Release Date: Nov 24, 2007
  • don't need dtsac3source.ax, anymore
  • don't need Nero Splitter, anymore
  • don't need Sonic HD Demuxer, anymore
  • replaced hacked DirectShow feeding with a cleaner approach
  • added support for DTS-HD Master Audio 7.1 tracks (only 5.1 decoding)
  • little performance boost for PAL speedup/down on DualCore CPUs
  • fixed some bugs
Version 2.02
  • Release Date: Nov 21, 2007
  • fixed: automatic registering of the dtsac3source filter crashed
Version 2.01
  • Release Date: Nov 19, 2007
  • new "-debug" switch added
  • fixed: automatic registering of the dtsac3source filter crashed
  • fixed: AC3 encoding sometimes crashed when being fed 24 bit audio data
  • fixed: AC3 encoded files were invalid when being fed 24 bit audio data
  • eac3toGUI didn't work with eac3to v2.0
  • "eac3to source.ac3 dest.ac3 -slowdown" didn't do anything useful
  • when a crash occurs, the bug report is automatically copied to clipboard now
  • some minor cosmetic improvements
Version 2.0
  • Release Date: Nov 18, 2007
  • can show information about audio files
  • can decode and encode various audio formats
  • can remove dialog normalization from AC3, E-AC3, DTS and TrueHD tracks
  • can extract AC3 stream from Blu-Ray TrueHD/AC3 tracks
  • can extract TrueHD stream from Blu-Ray TrueHD/AC3 tracks
  • can extract DTS core from DTS-HD tracks
  • can remove DTS zero padding and repair outdated DTS-ES headers
  • can apply positive or negative delay to decoded audio data
  • can reduce bitdepth of decoded audio data by using TPDF dithering
  • can resample decoded audio data (using "r8brain")
  • can apply/reverse PAL speedup on decoded audio data (using "r8brain")
Version 1.23
  • Release Date: Oct 5, 2007
  • bugfix: sometimes TrueHD decoding resulted in incorrect sampling rate
Version 1.12
  • Release Date: Aug 6, 2007
  • The tools "flac.exe", "aften.exe" and "sox.exe" are now distributed in the eac3to zip to make your life a bit easier.
  • Correct channel mapping for 7.1 LPCM tracks is default now.
  • The new option "-down6" allows downconverting of 7.1 tracks to 5.1 (this option is activated by default for AC3 and DTS encoding).
  • I'm shipping a modded "flac.exe" with eac3to now, which has no problems with 2GB file output, anymore!! As a result the flac encoding by eac3to should now be more or less perfect.
  • Fixed a number of bugs.
Version 1.8
  • Release Date: Jun 6, 2007
  • now has a GUI and it supports PCM input.
Version 1.6
  • Release Date: May 21, 2007

Rate this software:

Your Rating:
You have not voted yet!

Average: 3.87
Total Ratings: 43

 




Software Submissions