|
|
Version 5.10
- Release Date: Jun 29, 2008
- return to a four digit version number.
- Fixed a bug in the update checking code.
Version 5.09
- Release Date: Jun 25, 2008
- Small bug fixes.
- Changes to manual activation to improve,and speed up response.
- Changes to prepare for new changes coming for parity scanning.
Version 5.08
- Release Date: Jun 15, 2008
- Fixed a bug causing some trials to expire early.
- Small bug fixes.
Version 5.07
- Release Date: Jun 11, 2008
- Bug fixed in 5.02 crept back in where Liteon Avg Jitter was not showing.
Version 5.06
- Release Date: May 30, 2008
- Minor bug fixes.
Version 5.05
- Release Date: May 16, 2008
- Extend new activation routine further and fix some minor issues with it.
- Fix some minor bugs.
- Begin work on new code to auto send new media codes in.
- 5.04: Fixed a bug with all parity scanning.If the lower & upper scales were on a fixed scale while scanning,and the lower scale was changed to AutoPeak or AutoAvg the upper scale would also change to auto yet scale selection for the upper graph would stay on its current setting.
Version 5.03
- Release Date: May 8, 2008
- Fixed some minor issues
- Fixed an activation problem where keys were being
Version 5.02
- Release Date: May 3, 2008
- Fixed a problem where Liteon drives may hang on some Controllers
- Fixed an issue with Newer Liteon drives (20A3P) not showing jitter.
- Fixed an issue where Liteon Average jitter was not showing
- Fixed an issue with Liteon Average/Instant radio buttons re-enabling.
Version 5.0
- Release Date: May 1, 2008
Version 4.7.9.0
- Release Date: Feb 5, 2008
- Fixed an intermittent flicker on the ISO Compare graph.
- Rescaled all PIPO graphs to remove fraction on lowest scale.
- Changed MediaInfo so the screen clears before analysing the media.
- Added .nrg and .img as file types in Compare file requested window.
- Fixed a bug causing Blu-ray error test to fail on some drives.
- Fixed a bug where part of the compare graph could be left behind on the display.
- Fixed a bug similar to above where error test could write outside of the container.
- Fixed a bug in CRC and Compare graphs for Blu-ray, graph sizes were wrong.
Version 4.7.6.0
- Release Date: Dec 26, 2007
- Reduced executable size by 318KB this is about 10%.
- Added a function to decrypt the Windows CD Key and display under system information.
- Added Quality Rating for Graphs 1 and 2 in Compare PIPO feature.
- Added Jitter for Liteon PIPO scan with 1858 or later chipset,(E.G. DH-20A3P)
- Re-wrote the PIPO graphic plotter class as I have done for all other ones, this
makes the graph faster and is flicker free.
- Re-wrote the PIPO graphic compare plotter class same as above.
- Modified the CRC graph to no longer use bitmaps.
- Fixed a problem with the IBG,RPM line for DL DVD Media.
- Fixed a DVD DL scale issue in IBG graphing.
- Fixed a IBG problem when loading a SL followed by a DL DVD.
- Fixed the status display in System Information feature.
- Fine tuning of new Liteon jitter routine.
- Other small fixes.
Version 4.7.5.0
- Release Date: Nov 25, 2007
- Added “DVD Download” as a media type.
- Added “DVD Download” to QFlix detection string.
- Added HD-DVD compatibility to RPM Speed test feature.
- Increased RPM Speed first scale from 18x to 20x
- Added Rotational Control option to RPM Speed feature
- Added Speed choice option to RPM Speed Feature.
- Added an AACS detection tick box on DriveInfo
- Added an TSR detection tick box on DriveInfo
- Removed “book type” display under MediaInfo for HD-DVD
- Started incorporating the letters “HD” in the title showing support for HD drives.
- Fixed some bugs in DVD RPM Speed test feature
- Fixed some alignment issues in MediaInfo for HD-DVD and Blu-ray
- Fixed a bug in IBG Graphing, where if data was ‘verify’ only it didn’t show.
- Fixed a bug in IBG Scale coloring introduced when
- fixing the flicker.
- Fixed a problem where some drives in RPM speed could stick in CLV mode.
- Fixed a bug in RPM Speed where the “Show Speed” option did not work properly.
- Fixed a spurious spike in the RPM line in IBG Graphing.
- Fixed some missing Tool Tips
- Fixed missing icon in main dialog, preventing ALT-TAB switching
- Fixed a bug in IBG Graphing causing odd graphs after multiple loads
- Fixed a bug where some UDF Volume names could be blank under media info.
- Fixed an issue with the “activation” build that caused a crash in manual Activation mode.
Version 4.7.0.0
- Release Date: Oct 30, 2007
- Happy to announce SAMSUNG (TSSTcorp) PIPO parity scanning has been added.
- Fixed a bug where the selected drive handle remained open on exit of the program.
- Extended the new system information feature with much more CPU information.
- Fixed a minor graphical placement on driveinfo window.
- Fixed an issue with Blu-Ray IBG graph scaling on Dual Layer discs.
- Fixed an issue with IBG graph CD scaling
- Fixed an issue with some PIPO burners not being detected properly.
- Fixed a problem with the setting of speed in PIPO scanning.
- Added ImgBurn CD IBG file graphing.
- Fixed missing cpu / buffer usage bug in IBG Graph.
- Fixed an issue with IBG Graphic since update in 4.6.5.0
- Verified IBG graph can now display properly over 18x
- Improved the RPM feature to remove screen flicker.
- Improved IBG graph to allow speeds over 18x
- Removed some extraneous seek commands from parity scanning.
- Simplified the tests for PIPO suitable drives.
- Removed some redundant code.
- Fixed a bug in PIPO. When PIPO is clicked when a non supported drive as current, the start button was disabled, but clicking stop would enable it.Choosing start
under these circumstances could cause a lock up. The Start button now remains disabled under these conditions. PIPO mode is allowed with a non supported drive so you are able to load DIP files for viewing.
- Changed startup to render screen graphics earlier, stop the black void while scanning the BUS.
Version 4.6.3.1
- Release Date: Oct 4, 2007
- Changes for Roxio build
- Enhancements and fixes for Blu-ray and HD-DVD.
- Fixes for CRC check on HD discs.
Version 4.6.3.5
- Release Date: May 5, 2007
- Fixed some small errors with HD-DVD-ROM showing write abilities.
Version 4.634
- Release Date: Feb 26, 2007
- Better support for Windows One Care, allows retry when blocked.
- Fixes for some drives not showing correct capabilities.
Version 4.6.2.8
- Release Date: Jan 12, 2007
- Fixed problems with update strings and versions.
- Released Roxio Labs Full Version.
Version 4.6.2.6
- Release Date: Jan 6, 2007
- Added CSS Protected detect and display to Media info due to a user request
- Fixed a bug when cancelling ISO create file request dialog window.
- Tidied up some wrong line lengths in Media info.
Version 4.6.2.3
- Release Date: Oct 25, 2006
- Work on Vista compatibility.
- Work on BD and HD compatibility
- Begin to merge Sonic, Roxio and my code.
Version 4.6.1.6
- Release Date: Sep 1, 2006
- Fixed faulty compiler optimiser causing some crashes in the code.
Version 4.6.1.5
- Release Date: Aug 30, 2006
- Continuing work on new technologies, bug fixes etc.
- Much work on Blu-ray now I have a Pioneer BD-101A and some BD media compliments of Pioneer Australia. (Thanks Pioneer)
- Blu-Ray Media info now implemented.
- Fixed a bug in the UDF Volume Name.
Version 4.6.1.0
- Release Date: May 4, 2006
- Fixed recent hanging issue with Plextor PIPO scanning.
- Renamed HD DVD-RW to HD DVD-RAM in line with latest MMC spec
- Enhanced the detection of HD DVD media type read/write compatibilty.
- Fixed missing string in About window.
- Re-write major parts of the device class to accomodate new command functionality
- Added "Verify Time" to IBG graph when no "Burn Time" data is available
- Changed label of IBG configuration area.
- Added some Verify values in place of Write values when no write graph is available in the properties section.
- Added "Media Change Notification" disabling for the currently selected drive.
- Added "Drive Locking" on the current drive when the PIP0 Function is started.
- Fixed a bug if the Vendor and Product ID fields were max sizes, added a space in between the two.
- Applied workarounds for errors MAX and END values in some IBG files. These values are now set against the actual data.
- This version will set all colour options to default the first time its run due to changes in the saved format.
- Fixed some issues with changing colours with settings.
- Fixed an ASSERT with the new advert window.
- Made changes to IBG graph to add new functionality in latest Imgburn.
- Made split scaling in IBG Graph to accomodate upper and lower graph differnces.
- Added a "Download ImgBurn" button that takes you directly to the ImgBurn website
- Added a bright horizontal line between the upper and lower graph scaling in IBG Graph
- Added more tooltips to LED switches on IBG Graph page.
- Added Write Buffer Percentage to IBG graph and corresponding LED switch to toggle it on and off
- Added Write CPU Percentage to IBG graph and corresponding LED switch to toggle it on and off
- Added Verify CPU Percentage to IBG graph and corresponding LED switch to toggle it on and off
- Added new box to show the value of the Shift Sampled Position
- Added a zero to the scaling in IBG Graph.
- Changed the value of the IBG Shift Sampled Position slider from fixed values, to calculated values based on loaded graph.
- Changed "Show Graph" in IBG Graph to "Show Write"
- Altered Show Write LED Color to Yellow as it should have been.
- Added compatibility for VERSION 2 type IBG graphs for a new upcoming feature.
|
|
|
 |
|
